Anyone any experience of doing this ? I am aware there is at least one car out there with this.

Would love to hear from someone who has done / plans to do this imminently ..

Duncan Greir on RTOC owned the Car
Scoff on RTOC did a lot of the custom engineering

You basically need a modified subframe & engine mounts & then all of the relevent 20V Turbo bits.

I've a MK1 Williams with the 20V conversion in. I didn't do the work, a guy called Flan on WilliamsClio did it.

My car runs 246 BHP & is proper quick!

Here's a load of pictures of my Clio.

http://s306.photobucket.com/albums/nn25 ... eveT/Clio/

Awesomeness !

You mind me asking if you have any contact details for the chap ?

if i may ask, from which car is the engine? good project!

Audi, Seat, skoda it's the 1.8 20v turbo engine they use, Im belive some engines are slightly better spec than others within and some come with different turbo's

As Steve says above Scoff done the R5 conversion now ownerd by Minty on RTOC. And Steve has a super sexy 16v clio with the conversion aswell

ok, just as i was thinking...scoff had one 20v, right?

Scoff didn't own it Scoff built the R5 20v turbo engine the owner at the time was Duncan Grier

It really is

Which Chap? Yes i have contact details for both gents!

would u have any more pic's of the engine mounts???

anyone know were i can find pic's of that r5

thanks

Have a Look http://s306.photobucket.com/albums/nn259/BigSteveT/VAG%205%20GT%20Turbo/

thanks for that man